General

We release updates for NayaDevices and the companion software on a regular basis. This means that when you receive your NayaCreate it might no longer be up to date. To make sure that you have the best possible experience and all of the newest features you should update your NayaCreate before you start using it.

Updating NayaCreate

  1. To update your NayaCreate, please connect both keyboard halves using the provided cables to your computer. Do not connect your modules to NayaCreate just yet.

<aside> <img src="/icons/light-bulb_yellow.svg" alt="/icons/light-bulb_yellow.svg" width="40px" />

Note that NayaCreate can consume about 6W per keyboard half, so please make sure to connect to at least a USB3.0 port.

</aside>

  1. Turn the keyboard halves ON using the hardware switch on the sides of the keyboard halves. The LEDs on your NayaCreate halves should now power ON and your computer should indicate a connection.

  2. Open NayaFlow on your computer and confirm that both NayaCreate Left and NayaCreate Right are detected by NayaFlow.

Left and Right Connected.gif

hardware-manager-left-right-connection.gif

  1. Navigate to Hardware Manager→Create Firmware Update and verify that you see your NayaCreate halves. If modules are connected to your NayaCreate halves, you will have to disconnect them to proceed with the firmware update. We will update the firmware of the modules in the next section.

  2. Now you can press the UPDATE button and your NayaCreates should be updated to the newest available firmware. Note that in footage on the right, only the start and end of the process are provided. The actual update may take up to 4 minutes depending on the speed of your computer.

  3. NayaCreate will restart several times during the update process, this is normal and expected. NayaFlow will indicate when the update is complete and it is safe to use your keyboard again.

Update Start

Update Start

Update Complete (Note that the connection warning pop up is a bug which has been fixed since the recording of this video)

Update Complete (Note that the connection warning pop up is a bug which has been fixed since the recording of this video)

Updating NayaModules

Before we begin, please note that modules need to be updated one by one using the left keyboard half only. The right keyboard half should be turned OFF during the update process.

  1. Ensure that only a powered ON NayaCreate Left is connected to your computer using USB and a module is placed in the module dock of the keyboard half.
  2. Verify that NayaCreate Left and module are detected by NayaFlow.

nayacreate-left-tune-connected.gif

hardware-manager-left-tune.gif

  1. Navigate to Hardware Manager→Module Firmware Update and verify that you see the correct module.

  2. Now you can press the UPDATE button and your NayaFlow will start the update process of the module. Note that in footage on the right, only the start and end of the process are provided. The actual update may take up to 2 minutes depending on the speed of your computer.

  3. NayaCreate will restart several times during the update process, this is normal and expected. NayaFlow will indicate when the update is complete and it is safe to move on to the next module.

  4. Repeat the process for the rest of your modules.

Update Start

Update Start

Update End

Update End